Basement Tanking Kit – Single Pump Fully Auto (4m x 5m Room) This is the complete kit for waterproofing your basement / cellar make that old space into an amazing dry room.
In this complete Basement waterproofing kit you will get
- 1 x Basement Pump – Single Pump Fully Auto With Alarm Float Switch
- 10 x 2 Metres Of Aqua Channel Drain
- 4 x Aqua Channel 90′ Corners
- 1 x T Channel Drain
- 1 x Drain Outlet
- 2 x Rodding Port
- 1 roll of 2m x 10m P20 Membrane (Floor)
- 1 roll of 2m x 20m P8 Membrane (Walls)
- 100 x Brick Plugs
- 100 x Brick Plug Seals
- Butyl Tape Double Sided (20 Metre)
- Butyl Wall To Floor Tape (20 Metre)
- 1 x 10/160 SDS+ Drill Bit
P20 is a high capacity drainage membrane recommended for use on all floor applications below ground, due to its ability to control free flowing water.
P2 A tough and economical clear cavity drain membrane designed for wall and floor use in basement waterproofing of new and old properties. P8 is finished with baton and board or an independent stud wall.
This Basement Waterproofing Kit is to comply with BS8102 (2009)
Need to return a product? No problem! Hopefully you’ll never need to return an item, however, if you do, it is our aim to make this process as easy as possible.
Things to take into consideration before processing a refund / Exchange
- The item should not have been worn and should be in the same condition as when supplied (we appreciate you may have tried it on for size) All “tags” and labels should be intact.
- If the garment was supplied in its own bag then it must be returned in that bag in order to obtain a refund with all tags still attached. Please remember: If a garment is being returned it MUST be resaleable – So we are unable to accept an item that is screwed up and not in the condition where it can go back on the shelf
- If you are returning a worn garment that you feel may have developed a fault the cost of return will be the customers resposibilty and please remember the garment must be washed before sent, any garment returned unclean will be rejected.
- Also enclose a copy of the original sales receipt. If a manufacturing fault is confirmed the following applies. If the garment is under 6 weeks old a exchange or refund can be requested. If over 6 weeks then the garment can only be exchanged
If your looking to return a product please click the link for our easy returns form - Returns