Light Duty Stainless Steel Cavity Wall Ties

The unique tangle free design of Tec Ties Type 4 Light Duty Stainless Steel Cavity Wall Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to two storeys or a maximum 10m in height.
Fully tested to EN845-1 and DD140:Part 2, the TT4 Ties are BBA approved and will also meet requirements of Part E of the Building Regulations for a Type A in external and party walls

PAM Brass Wall Ties - PB10

PAM Brass Wall Tie is a unique design concept ? a pre-torqued full radial anchor expansion fix tie of the highest quality.
The PAM Brass Wall Tie sets new standards in replacement wall ties.
Its unique design concept creates a tie which provides maximum anchoring strength over a far greater surface area than the traditional ?point loading? anchoring system currently used in other replacement wall ties.
Its unique design ensures the fixing sleeve expands along its full radial length to provide an extremely strong uniform fix over the entire surface area of the sleeve anchor giving a substantially improved and more reliable ?fix? than the traditional sleeve which, because of its design limitations, only achieves a ?point loading? fix over a relatively small part of its surface area.
The PAM Brass Wall Tie is an extremely reliable double mechanical pre-torqued tie that sets new standards in replacement wall ties.
The PAM Brass Wall Tie?s unique sleeve design concept allied to the proven special coated black stainless steel precision limited torque nut combined with the precision modified steel bar provides a fixing system which permits rapid continuous fixing along the full radial length of the fixing sleeves in under 10 seconds, ensures inner leaf fixes to pre-torqued level before outer leaf engages and the pre-torque setting reliably produces pull out figures of over 2.5Kns

PAM Fix Ties

PAM-Fix is the reliable Double Mechanical Precision Pre-Torqued Tie that sets new standards in replacement wall ties.
Its unique, special torque nut provides a fixing system which permits :
Rapid continuous fixing to both inner and outer leafs in under 10 seconds
Ensures inner leaf fixes to pre-torqued level before outer leafs in under 10 seconds
Pre-torqued setting reliably produces pull out figures of over 2.5 Kn
Independent pull testing of the inner leaf AFTER fixing into9 the wall allows any or every tie to be pull tested on the inner leaf after initial fixing is required.
Can be easily fitted using a power drill or a single manual tool for fast, efficient, low cost installation.

PAM Lateral Restraints

PAM Lateral Restraints are manufactured from 304 Austenitic Stainless Steel rods, 8mm in diameter.
PAM Lateral Restraints are supplied in standard lengths of 1 metre but are available in any length by prior arrangement.
PAM Lateral Restraints are designed to restrain the whole of the brick outer structure to the floor joists.
PAM Lateral Restraints can be fitted from outside the property with a minimum of disturbance ? in most cases just a lifting of the floorboards to determine the position of the joists

PAM Neoprene Expansion Wall Ties - PN11

PAM-Neoprene Expansion Wall Tie is the reliable Double Mechanical Precision Pre-Torqued Tie that sets new standards in replacement wall ties.
PAM-Neoprene Expansion Wall Tie has a unique, special torque nut which provides a fixing system which permits rapid continuous fixing to both inner and outer leafs in under 10 seconds.
PAM-Neoprene Expansion Wall Tie ensures inner leaf fixes to pre-torqued level before outer leafs in under 10 seconds.
Pre-torqued setting reliably produces pull out figures of over 2.5 Kn.
Independent pull testing of the inner leaf AFTER fixing into the wall allows any or every tie to be pull tested on the inner leaf after initial fixing is required.
PAM-Neoprene Expansion Wall Tie can be easily fitted using a power drill or a single manual tool for fast, efficient, low cost installation

PAM Resin Fix Ties

The PAM Resin Fix Tie is a wall tie system with a resin fixing in the inner leaf and a resin fixing on the outer leaf.
The PAM Resin Fix Tie is used when a resin bond is required in bother inner and outer leafs of differing materials like air-crete blocks, clay bricks, stone and concrete blocks and is ideal for small, one-off jobs of about 30 to 200 ties.

Stainless Steel Clamp Ties

For fixing steel to masonry

Wavy Triangle Tie

For rebuilding an outer skin to an existing wall

28/15 Plain Back Channel

28/15 plain back channel for surface fixing (welding). Used in conjunction with ties to restrain brickwork.

28/15 Slotted Back Channel

28/15 slotted and holed channel for surface fixing. Slots and holes repeat every 75mm to ensure a fixing point is available along the entire length. Various fixings can be used in conjuntion with ties to restrain brickwork.

28/15 Tanged Back Channel

28/15 tanged back channel for casting into concrete or building into brick/blockwork. Polystyrene infill available upon request. Used in conjunction with ties to restrain brickwork.

Clasp Tie

Clasp tie, fixed to the side of a stanchion and used to restrain brickwork.

Coil Mesh - Galvanised

20m roll. An expanded metal mesh available in various width, stainless or galvanised steel. Designed to be incorporated into masonry for crack control.

Column Tie

A simple and cost effective product for restraining masonry back to 'H' section stanchions, providing four different slots to suit differing flange thickness.

Debonding Sleeve

Debonding sleeve to allow movement of certain ties (a 25mm wide sleeve is required for channel ties). Debonding sleeves should have a 10mm gap left at end to allow for movement once installed),

Double Vista Weld

Double Vista Weld is a welded structural ladder type masonry reinforcement used to reinforce both leaves of a cavity wall. Manufactured in Stainless Steel Grade 304 S15, Double Vista Weld is manufactured with a 3.5mm main longitudinal wires with 3.6mm cross wires (with a drip). Each length is 3.05m long and is available in numerous widths to suit individual design requirements.

Dovetail Plain End Tie

This product allows lateral movement between masonry and a fixed channel or slot. (Sleeve supplied as extra)

Dovetail Safety Tie

As VE7 but supplied with a slot in upstand to allow various fixings

Dovetail Safety Tie

Universal head enables this tie to be used with all V60 channel systems and V29 slot to restrain brickwork supplied with a drip to prevent the passage of moisture across cavity. Drip positioned 90mm from safety end as standard.

Dovetail Slot

Cast in dovetail slot, pre-filled with polystyrene (to prevent concrete ingress). Used in conjunction with ties to restrain brickwork).

Dovetail Wire Tie

Universal head enables this tie to be used with all channel systems to restrain brickwork. The wire section allows for extra movement.

Dowel Bar

Stainless steel dowel bar.

Frame Cramp

Frame cramp (supplied in stainless or galvanised steel) for restraining masonry to new or existing structures and for building in non-structural elements (frames, etc.)

Frame Cramp with Drip

Frame cramp supplied with a drip to prevent moisture crossing the cavity. Drip position 90mm from safety end as standard.

General Purpose Wall Tie

Multidrip feature to prevent moisture travelling across the cavity. The design means that the tie can be installed either way up. Tested as Type B (sound). Tested as Type 2 (strength) to BS EN 845-1

Heavy Duty Dripped Safety Tie

Drip feature to prevent moisture travelling across the cavity (taking less space than vertical twist). Tested as B (sound). Tested as Type 1 (strength) to BS EN 845-1. Drip position 90mm from safety end as standard.

Heavy Duty Flat Safety Tie

Used in full fill cavities or where the prevention of moisture travelling across the cavity is not an issue. Also for collar jointed walls. Tested as Type B (sound). Tested as Type 1 (strength) to BE EN 845-1.

Heavy Duty Formed Safety Tie

Constant drip feature to prevent moisture travelling across cavity. Tested as Type B (sound). Tested as Type 1 (strength) to BE EN 845-1.

Heavy Duty Safety Vertical Twist

Vertical twist feature to prevent moisture travelling across the cavity. Tested as Type B (sound). Tested as Type 1 (strength) to BS EN 845-1.

Insulation Clip - universal

Universal insulation retaining clip used to hold insulation material against the inner wall of a cavity.

Internal Head Restraint

The VIR Head Restraint is designed to resist lateral movement in wall heads, restraining them to structural soffits whilst allowing vertical movement (in order, for instance, to accommodate beam deflection).

Light Duty Housing Tie

Multidrip feature to prevent moisture travelling across the cavity. The design means that the tie can be installed either way up. Tested as Type A (sound). Tested as Type 4 (stength) to BS EN 845-1

Plain End Clasp Tie

Used for side fixing a steel column to masonry whilst allowing lateral movement. (Sleeve supplied as extra)

Plain End Frame Cramp

Used for restraining masonry to steelwork whilst allowing lateral movement. (Sleeve supplied as extra).

Safety Plain End Tie / Blank

Used over a movement joint in a run of brickwork of blockwork with safety embedment detail of plain end (B20). (Sleeve supplied as extra).

Slotted Frame Cramp

As VE7 but supplied with a slot in upstand to allow various fixings

Slotted Frame Cramp with Drip

As VS7 but supplied with a drip to prevent moisture crossing the cavity. Drip position 90mm from safety end as standard.

Steel Channel Tie

Head specific for steel frame channel (product ref : SFC). Tie is designed to suit a variety of cavities.

Steel Frame Channel

The steel frame channel system is designed to tie brickwork to steel studding. Self drill / self tap screws fix through the channel and insulation into the steel studding.

Timber Frame Tie

50 - 75mm cavity. Stainless steel masonry timber tie for 50-100mm cavities in timber frame buildings. Accommodates vertical movement. Tested as Type B (sound). Tested as Type 6 (strength) to BE EN 845-1.

Traditional Butterfly Wall Tie

Traditional Butterfly Wall Tie previously to BS1243. Twist central is used to prevent moisture travelling across cavity (twist must be placed down the cavity). Accepted as Type A (souund). Previously to BS1243.

Traditional Double Triangle Wall Tie

Traditional Double Triangle wall tie previously to BS1243. Multidrip feature to prevent moisture travelling across the cavity. Design menas the tie can be installed either way up. Tested as B (sound). Tested as Type 2 (strength) to BS EN 845-1.

Two Part Ties

150mm cavity. As a result of problems experienced over wider cavities and their weight causing long ties to overturn, the Vista two part tie allows larger cavities to be spanned (up to BE EN 845 - 1 standard for a type 2 tie). The shorter section is built into the inner leaf as construction proceeds, whilst the longer section is locked into the inner section and built into the outer leaf as it lifts. Tested as B (sound). Tested as Type 2 (strength) to BS EN 845-1.

Universal Stainless Steel Wall Starter System

The Universal Stainless Steel Wall Starter System joins new walls to existing masonry. Suitable for both internal and external brick or block walls, the connectors can be slotted together up to a maximum of 8m or 3 storeys high from 60 to 250mm thick. The pack contains the fixings necessary for a single leaf wall up to 2.4m (8Ft) - 2 x 1.2m long stainless steel wall connectors, 5 x plugs, coach screws and washers and 10 x stainless steel wall connector ties.

Vista Tie Span - S/Steel

3.15m long x 175mm wide and 4mm longitudinal wires with 20mm flat cross ties. Vista Tie Span Type 1 has been designed for use in double leaf collar joint walls and can reduce the problems on site with heavy blocks, using 2 x 100mm blocks tied together with Tiespan Type 1 to replace a 215mm block. This method of construction also givens the wall a 6 hour fire rating.

Vista Weld - Galvanised

A welded ladder type bed joint reinforcement with 3.5mm flattened outer wires, generally used as a structural product but also ideal for crack control. Stainless steel Grade 304 S15. Conforms to BS 5628 : Part 2 2000.

Vista Weld - S/Steel

A welded ladder type bed joint reinforcement with 3mm outer wires, generally used as a structural product but also ideal for crack control. Stainless steel Grade 304 S15. Conforms to BS 5628 : Part 2 2000.

Head Restraint

The VHR is a very simple, economical head restraint product. Twice holed to accommodate 100 or 140mm walls. Vertical movement can be accommodated only by allowing clearance between the top of the blockwork panel and the underside of the restraint angle.