<%@LANGUAGE="VBSCRIPT" CODEPAGE="CP_ACP"%> DPC Products

You are here - Homepage > DPC & Timber Treatment > DPC Products > PAM Drainage System

 

PAM DRAINAGE SYSTEM

 
o o o o o
 

 

GENERAL PRINCIPLES (top)  
     
-

a complete "off the shelf" drainage system

 
-
system comprises drainage channel, sump, pump and all fittings  
-
suitable for use with all Platon Cavity Drain membranes  
  The system comprises PAM Aqua Channel (a PVC drainage conduit which is fitted around the perimeter of the floor) and the PAM Aqua Pump Kit (a mains powered submersible pump and pre- formed sump). The sump is located into the floor with the removable, structural lid finishing flush with the surrounding floor level. The submersible pump is then installed inside the sump and controlled by an automatic integral float switch. Also available are a non-return valve, to avoid water backing up, and a high level water alarm, which warns of mechanical or power failure. A 12v Battery Back-up Pump is also available.  
     

 

TECHNICAL DATA (top)  
     
-
The sump basin is 560 mm high x 460 mm diameter.
 
-
The 240v pump requires wiring into a fused spur outlet within 1.5m of the pump.  
     

 

PUMP SPECIFICATION (top)  
     
Discharge Bore:
50mm
Max. Head : 5.2m
Max. Capacity: 220 litres/min
Motor Output: 150w
Revolution: 3000 rpm
Max. Width: 226mm
Max. Height: 340mm
Weight: 4.8kg
 
     

 

(top)