| You are here - Homepage > DPC & Timber Treatment > DPC Products > Epoxy Products |
EPOXY PRODUCTS
o o o
o o |
||||
PAM's range of epoxy products are principally designed for
structural and non-structural repair of
timber and masonry. Within this range are structural grouts for repairing
voids or bearing ends in timber
affected by insect attack or rot, non-structural mortars for filling voids
in timber or masonry, adhesives
for bonding structural fixings, consolidants for insect damaged and friable
timber and waterproof coatings
for walls and floors, above and below ground.
 |
PAMMOL 15 LIGHTWEIGHT MORTAR (top) | |
| Ideal for fast repair
of concrete and timber in vertical and overhead work and rapidly attains
mechanical strength sufficient to exceed that of good quality concrete.
A three component system which provides a cold or warm setting, lightweight,
low slump filler for use in non-structural applications. Best used in
conjunction with PAMmol23 as a primer. Supplied in 5 litre packs. |
||
|
PAMMOL 23 THIXOTROPIC EPOXY ADHESIVE (top) | |
| Designed
for building and civil engineering applications wherea thixotropic (negligible
slump) adhesive or primer is required. A two component solvent-free adhesive,
PAMmol 23 can be applied in cold, damp conditions and will remiain in
place on vertical or inverted surfaces. Forms a strong bond to wood, metals,
glass reinforced plastics and laminates. Supplied in 0.66 litre packs. |
||
|
PAMMOL 34 TIMBER CONSOLIDANT (top) | |
| A two component
low viscosity epoxy resin system which creates an almost colourless liquid
to provide a cold or warm setting consolidant for wood. Will consolidate
friable, worm infested or tack damaged furniture and provide a base for
further restoration. Supplied in 1.34 litre packs. |
||
|
PAMMOL 36 STRUCTURAL GROUT (top) | |
| A three
component, pourable epoxy resin system for use as a structural grout.
Cold or warm setting, PAMmol 36 gives a structurally discreet back-fill,
principally for timber repairs. The cured product creeps sufficiently
under loading to accommodate movement in complex timber joints. A versatile
product for site repairs to rotten, insect or fire damaged timbers and
to remake joints or breaks. Recommended for use with PAMmol 50 reinforcement
rods. Supplied in 2.69 or 8.13 litre packs. |
||