<%@LANGUAGE="VBSCRIPT" CODEPAGE="CP_ACP"%> DPC Products

You are here - Homepage > DPC & Timber Treatment > DPC Products > Wood Preservation Products

 

WOOD PRESERVATION PRODUCTS

 
o o o o o
 

PAMtec wood preservatives are third generation bicontinuous micromulsion concentrates, cleared under
the Control of Pesticides Regulations for professional use and granted 1 hour re-entry clearance. The water
based PAMtec range offers excellent penetration to timber, is non-hazardous and non-flammable.

PAMTEC 120 / PAMTEC 121 (top)  
     
For the eradication of Common Furniture Beetle (Anobium Punctatum) and other wood boring insects. Once diluted 24.5 : 1 with clean water, PAMtec 120 has a Permethrin content of 0.1%. PAMtec 121 has a Permathrin content of 0.2% when diluted 24 : 1. PAMtec 120 is supplied in 0.5 litre packs. PAMtec 121 is supplied in 1 litre packs.
 
     

PAMTEC 120 PLUS / PAMTEC 121 PLUS (top)  
     
For the eradication of Common Furniture Beetle and other wood boring insects and the control of wood destroying fungi. Once diluted 24 : 1 with clean water PAMtec 120 Plus has a Permethrin content of 0.1% PAMtec 121 Plus has a Permethrin content of 0.2% when diluted 24 : 1. Supplied in 1 litre packs.  
     

TRIMETHRIN OS PLUS (top)  
     
An organic solvent wood preservation for the eradication of wood boring insects and for the control of wood destroying fungi.
Supplied ready to use in 25 litre packs.
 
     

TRIPASTE (top)  
     
A deep penetrating, heavy bodied "mayonaise" type wood preservation for the eradication of wood boring insects and for the control of wood destroying fungi. Suitable for the treatment of timber which is difficult to penetrate with conventional sprayed preservatives.
Supplied in 10 litre packs.
 
     

 

PAMbor water soluble products are ready to use formulations based on inorganic boron with glycol carriers.
They are highly effective for the treatment of insect and fungal attack in timber and for the control of
dry rot, mosses, lichen, fungi and algae on internal and external surfaces. Due to the hygroscopic nature
of the PAMbor products they are particularly suited to damp "at risk" timbers such as embedded joist ends,
lintels, wall plates, rafters, panelling etc. Low volatility PAMbor products offer deep penetration into wet or
dry timber and masonry. They are virtually odourless and non-flammable and have a very low mammalian
toxity.

PAMBOR PLUS (top)  
     
A unique gel which combines boron with the insecticidal properties of Permethrin. Its deep penetration properties mean that damp timbers, where Death Watch Beetle is often present, can be sucessfully treated - even if the moisture content is considered too high for the use of conventional timber paste. Provided treated surfaces are protected until dry, there is no stipulated re-entry time. Supplied in 5 litre packs.  
     

PAMBOR 10 (top)  
     
PAMbor 10 is an aqeuous boron based wood preservative and masonry biocide suitable for the eradication of Common Furniture Beetle and other wood boring insects and for the prevention of fungal decay in sound timbers. PAMbor 10 may be used to treat masonry infected with dry rot and also to control algae, moss and lichen. PAMbor 10 will penetrate deeply and rapidly into masonry and sub-site soil. Supplied ready to use in 5 and 25 litre containers.  
     

PAMBOR 20 (top)  
     
A highly effective biocidal product designed to be surface applied or injected into in-situ building timbers to eradicate and prevent fungal decay and attack by wood boring insects. Supplied ready to use in 5 and 25 litre packs.
 
     

PAMBOR GEL (top)  
     
Supplied in easy to use cartridges for injection into "at risk" timbers - typically embedded joist ends. Should be used in conjunction with PAMbor 20. Supplied in ready to use 400ml cartridges.  
     

 

(top)