| You are here - Homepage > DPC & Timber Treatment > DPC Products > PAMJECT & P.I.M |
DAMP PROOFING SYSTEMS
o o o
o o |
||||
 |
PAMJECT RAPID (top) | |
| PAMject
Rapid is a unique high performance DPC concentrate, formulated to produce
a rapid injection, dilution stable water based DPC fluid. PAMject Rapid
can be injected into the mortar joints or masonry units (brick, block
or stone) to form a continuous barrier to the passage of moisture rising
from the ground. After injection, PAMject Rapid reacts with carbon dioxide
to form a water repellent silicone resin network is permeable to water
vapour which means that the walls can "breathe" and dry out
naturally. PAMject Rapid's high penetration properties mean that the risk
of staining is significantly reduced, although care should be taken to
avoid spillage. Supplied in 2.5 litre and 25 litre containers. |
||
|
PAMJECT 2 DPC FLUID (top) | |
| PAMject 2 is a ready
to use, organic solvent damp proofing liquid, intended for injection into
walls affected by rising damp. PAMject 2 can be injected into pre-drilled
holes formed either in the brick or the mortar joints to form a continuous
barrier against water rising from the ground. Within the walls PAMject
2 reacts with water already present to form a permanent water repellent
coating within the capillaries of the masonry. PAMject 2 contains silicone
resin. Supplied in 25 litre containers. |
||
|
PAMJECT 3 DPC FLUID (top) | |
| PAMject 3 is a water
based damp proofing liquid intended for injection into walls affected
by rising damp. PAMject 3 can be injected into pre-drilled holes formed either in the bricks or the mortar joints to form a continuous barrier against water rising from the ground. Within the walls PAMject 3 reacts with carbon dioxide to form a permanent water repellent coating within the capillaries of the masonry. PAMject 3 is supplied in concentrate form and should be diluted for use. The active ingredient is Potassium Methyl Siliconate. Supplied in 3.6 mitre and 25 litre containers. |
||
|
PAM INJECTION MORTAR (P.I.M) (top) | |
| P.I.M. is a one component injection mortar designed to prevent rising damp in walls. A blend of Ordinary Portland cement, selected fine quartz aggregates and active waterproofing chemicals which, when mixed with water, create a smooth slurry. P.I.M. is activated by a chemical reaction between moisture in the structure and waterproofing chemicals in the mortar, which forms a crystalline growth that blocks the pores, capillaries and fine cracks in the structure. P.I.M. is suitable for injection in most types of construction, especially thick or random rubble filled walls. It is odourless and gives off no toxic vapours. Supplied in 25kg bags. | ||