PAM RESIN FIX TIE

	ABOUT PAM RESIN FIX TIE (top)
	The RESIN FIX cavity wall tie replacement system, when a resin bond is required in both inner and outer leafs of differing materials like, air-crete blocks, clay bricks, stone, and concrete blocks, ideal for small one off jobs of about 30 to 200 ties.

	INSTALLATION PROCEDURES (top)
1	Drill clearance hole through outer leaf and 70mm into inner leaf.
2	Clear both holes of any dust or debris.
3	Fill inner hole with PAM RESIN
4	Insert PAM RESIN FIX TIE.
5	Load test PAM RESIN FIX TIE.
6	Fill clearance hole with PAM RESIN to bond tie to outer leaf.

	REMEDIAL WALL TIE SYSTEM (top)
	REMEDIAL WALL TIE SYSTEM WITH A RESIN FIXING IN THE INNER LEAF AND A RESIN FIXING ON THE OUTER LEAF.
	PAM RESIN FIX TIES are manufactured out of 304 or 316 Stainless Steel and have been independently testing using a common range of building materials by the University of Portsmouth material testing department in accordance with BS 1243 and DD140. They can be installed quickly and easily by drilling a clearance hole through the outer leaf then 70mm into the inner leaf. After cleaning out the holes with an air pump, fill the inner hole with resin and then insert RESIN FIX TIE and then fill outer hole with resin. The constant helix of RESIN FIX TIES gives multi water drips, stopping water transfer across cavities. The low cross sectional area of RESIN FIX TIES gives good sound proofing qualities and allows lateral flexibility to overcome any misalignment or seasonal thermal movement while still maintaining the required resistance to wind-loads.

	TIE CLASSIFICATION DD140 (top)
	Material Tie Size Tie Density Fixing Air-crete blocks 6mm 2.5m2 Class 3 Soft clay bricks 6mm 2.5m2 Class 2 Concrete blocks 6mm 2.5m2 Class 2 Hard clay bricks 6mm 2.5m2 Class 2 Engineering bricks 6mm 2.5m2 Class 2

(top)