| You are here - Homepage > Wall Ties > Types of Wall Tie > PAM Fix Tie |
PAM FIX TIE
o o o o o |
|
ABOUT PAM FIX TIE (top) | |
| The versatile PAM-FIX wall tie replacement system can be used to tie together a large range of differing materials like timber, air-crete blocks, clay bricks, stone, concrete blocks and steel beams. | ||
|
INSTALLATION PROCEDURES (top) | ||
1 |
Drill clearance hole in outer leaf. |  |
|
2 |
If required drill pilot hole in inner leaf. |  |
|
3 |
Use support tool to drive tie into inner leaf. |  |
|
4 |
Load test tie to required site loads. |  |
|
5 |
Fill clearance hole with PAM RESIN to bond tie to outer leaf. |  |
|
REMEDIAL WALL TIE SYSTEM WITH A HELICAL FIXING IN THE INNER LEAF AND A RESIN FIXING ON THE OUTER LEAF.
|
MORE ABOUT PAM FIX TIE (top) | |
| PAM-FIX TIES are manufactured out of 304 or 316 Stainless Steel and have been independently testing using a common range of building materials by the University of Portsmouth material testing department in accordance with BS 1243 and DD140. They can be installed quickly and easily by drilling a clearance hole through the outer leaf. Then depending on inner leaf material install either a 6mm or 8mm tie varier a pilot hole in the inner leaf if required. PAM-FIX TIES are a stress free fixing, allowing them to be installed close to the edge of bricks/blocks and concrete without causing any splitting or cracking. When being used for tying cavity masonry the constant helix of PAM-FIX TIES gives multi water drips, stopping water transfer across cavities. The low cross sectional area of PAM-FIX TIES gives good sound proofing qualities and allows lateral flexibility to overcome any misalignment or seasonal thermal movement while still maintaining the required resistance to wind-loads. | ||
|
TECHNICAL DATA (top) | |||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||